SKU: PRODUCT ID:12848b
Zeiss LSM 780 Confocal
Zeiss LSM 780 Confocal
Couldn't load pickup availability
Optional Installation and Service Contract
LSM780 Specifications:
Scanning Module
- Models: Scanning module with 34 spectral detection channels; high QE (45% for GaAsP typically), 3 × lower dark noise; up to 10 individual, adjustable digital gains; prepared for lasers from UV to IR
- Scanners: Two independent, galvanometric scan mirrors with ultra-short line and frame flyback
- Scan resolution: 4 × 1 to 6144 × 6144 pixels; also for multiple channels; continuously variable
- Scanning speed: 15 × 2 speed stages; up to 8 frames/sec with 512 × 512 pixels (max. 250 frames/sec 512 × 16); up to 4000 lines per second
- Scan zoom: 0.6 × to 40 ×; digital variable in steps of 0.1 (on Axio Examiner 0.67 × to 40 ×)
- Scan rotation: Free rotation (360 degrees), in steps of 1 degree variable; free xy offset
- Scan field: 20 mm field diagonal (max.) in the intermediate plan, with full pupil illumination
- Pinholes: Master pinhole pre-adjusted in size and position, individually variable for multi-tracking and short wavelengths (e.g. 405 nm)
- Beam path: Exchangeable TwinGate main beamsplitter with up to 100 combinations of excitation wavelengths and outstanding laser light suppression; optional laser notch filters for fluorescence imaging on mirror-like substrates (on request); outcoupling for external detection modules (e.g., FCS, B&H FLIM); low-loss spectral separation with recycling loop for internal detection
- Spectral detection: Standard: 34 simultaneous confocal fluorescence counting channels with highly sensitive low dark noise PMTs (2x) and GaAsP (32x); spectral detection range freely selectable (resolution down to 3 nm); in addition, two incident light channels with APDs for imaging and single photon measurements; transmitted light channel with PMT; cascadable non-descanned detectors (NDD) with PMT or GaAsP NDD unit for Axio Examiner and Axio Observer
- Data depth: 8-bit, 12-bit, or 16-bit selectable; up to 37 channels simultaneously detectable
Laser Inserts
- Laser inserts (VIS, V): (VIS, V, In Tune) pigtail-coupled lasers with polarization preserving single-mode fibers; stabilized VIS-AOTF for simultaneous intensity control; switching time < 5 μs, or direct modulation; up to 6 V/VIS-laser directly mountable in the scanning module; diode laser (405 nm, CW/pulsed) 30 mW; diode laser (440 nm, CW+pulsed) 25 mW; Ar-laser (458, 488, 514 nm) 25 mW or 35 mW; HeNe-laser (543 nm) 1 mW; DPSS-laser (561 nm) 20 mW; HeNe-laser (594 nm) 2 mW; HeNe-laser (633 nm) 5 mW (pre-fiber manufacturer specification)
- External lasers (NLO, VIS, UV/V): Prepared laser ports for system extensions; direct coupling of pulsed NIR lasers of various manufacturers (including models with prechirp compensation); fast intensity control via AOM; NIR-optimized objectives and collimation; fiber coupling (single-mode polarization preserving) of external In Tune Laser, (488-640nm, <3nm width, pulsed) 1,5mW and prepared for UV laser (355nm, 60mW), manipulation lasers of high power in the VIS range 488–561 nm (e.g., LSM 7 DUO-systems)
Electronics Module
- Real-time electronics: Control of the microscope, the lasers, the scan module and other accessory components; control of the data acquisition and synchronization by real-time electronics; oversampling readout logic for best sensitivity and 2 × better SNR; data communication between real-time electronics and user PC via Gigabit-Ethernet interface with the possibility of online data analysis during image acquisition
- User PC: Workstation PC with abundant main and hard disk memory space; ergonomic, high-resolving 16:10 TFT flat panel display; various accessories; operating system Windows VISTA 32 or 64-bit; multi-user capable
Configuration shown is for demonstration purposes. Contact us to discuss your application and needs for a customized quote.
Additional Details
Additional Details
- Manufacturer: Zeiss
- Model:
- Catalog Number:
- Serial Number: 2504000137
- Condition:






Why Coastal?
we offer expert consultation services designed to tailor high-quality pre-owned imaging equipment to meet your precise requirements.

We Buy Used Lab Equipment!
Whether you want to trade-in your equipment, downgrade, or upgrade, our team of professionals will work with you to guarantee your satisfaction.

180 Day Warranty
We offer Up to 1-Year Parts & Labor Warranty (with extended contract offerings), Quality Control & Assurance Documentation and Expert Technology & Application Advice.

Free Expert Consultation
Let us help you customize an imaging solution for your needs.