• Hamamatsu ORCA-Flash4.0 LT3 4.2MP Monochrome sCMOS Microscope Camera
1 0

PRODUCT ID:52452

Hamamatsu ORCA-Flash4.0 LT3 4.2MP Monochrome sCMOS Microscope Camera

Hamamatsu ORCA-Flash4.0 LT3 4.2MP Monochrome sCMOS Microscope Camera

$6,825.00 USD
$6,825.00 USD
Sale Sold out
Shipping calculated at checkout.
  • ✓ Tested in house. 180-day parts and labor warranty (US). International: 30-day parts warranty
  • ✓ Typical delivery in 1 to 3 weeks, depending on parts
  • ✓ Installation, training and service available from our engineers (quoted separately)
  • ✓ SAM.gov registered (CAGE 10ZU5). Purchase orders welcome
  • ✓ Leasing and finance companies available

Questions? Call (877) 564-2767 or email sales@coastalmicroscopes.com

Hamamatsu ORCA-Flash4.0 LT3 4.2MP Monochrome sCMOS Camera (C11440-42U40), Demo

The Hamamatsu ORCA-Flash4.0 LT3 (C11440-42U40) is a 4.2 megapixel monochrome scientific CMOS (sCMOS) camera built for fluorescence imaging. It pairs 82% peak quantum efficiency and readout noise as low as 0.9 electrons median with 40 frames per second at full resolution over USB 3.0, delivering a high signal-to-noise ratio for low light work such as live-cell and time-lapse imaging.

Condition

Demo: This demonstration unit has been inspected and verified to meet manufacturer specifications.

Included Items

  • Hamamatsu ORCA-Flash4.0 LT3 camera (C11440-42U40)
  • Power supply
  • USB 3.0 cable
  • USB 3.0 board
  • Trigger cable

Key Features

  • 4.2 Megapixel Gen II sCMOS Sensor: 2048 × 2048 pixels at 6.5 µm, covering a 13.312 mm × 13.312 mm field of view.
  • 82% Peak Quantum Efficiency: High sensitivity for dim fluorescence signals.
  • Low Readout Noise: 1.5 electrons rms (0.9 electrons median) in standard scan.
  • 40 fps at Full Resolution: Rapid rolling readout for experiments that need high temporal resolution, with 30 fps in standard scan.
  • 33,000:1 Dynamic Range: 16-bit digital output captures bright and dim structures in the same frame.
  • Flexible Triggering: Edge, level, global reset, synchronous readout and start trigger modes, plus three programmable timing outputs for synchronizing light sources and stages.
  • Binning and Sub-Array Readout: 2×2 and 4×4 binning with selectable regions of interest.
  • Peltier Cooled: Sensor held at +10 °C with forced-air cooling for low dark current.
  • USB 3.0 Interface and C-Mount: Simple connection to the PC and to most research microscopes.

Applications

  • Widefield fluorescence microscopy
  • Live-cell imaging
  • Time-lapse imaging
  • Multidimensional imaging
  • Calcium (Ca2+) imaging
  • DNA chip reading

Specifications

Specification Details
Product Number C11440-42U40
Imaging Device Scientific CMOS (sCMOS) image sensor, monochrome
Effective Pixels 2048 (H) × 2048 (V), 4.2 MP
Pixel Size 6.5 µm × 6.5 µm
Effective Area 13.312 mm × 13.312 mm
Quantum Efficiency 82% peak
Full Well Capacity 30,000 electrons (typ.)
Frame Rate (Full Resolution) 40 fps rapid rolling; 30 fps standard scan
Readout Noise Standard scan: 1.5 e- rms, 0.9 e- median; Rapid rolling: 1.9 e- rms, 1.3 e- median
Dynamic Range 33,000:1 (typ.)
Exposure Time 1 ms to 10 s (rapid rolling); 3 ms to 10 s (standard scan)
Cooling Peltier with forced air, +10 °C
Dark Current 0.6 electrons/pixel/s (typ.)
Binning 2×2, 4×4
Digital Output 16 bit
Trigger Modes Edge, global reset edge, level, global reset level, synchronous readout, start
Trigger Output 3 programmable timing outputs, trigger ready, global exposure timing (SMA)
Interface USB 3.0 (USB 3.1 Gen 1)
Lens Mount C-mount
Power AC 100 V to 240 V, 50/60 Hz, approx. 75 VA

This demo Hamamatsu ORCA-Flash4.0 LT3 (C11440-42U40) offers Gen II sCMOS performance at a lower price than a brand-new unit. Contact us to discuss your application.

Additional Details

  • Manufacturer: Hamamatsu
  • Model:
  • Catalog Number: 52452
  • Serial Number:
  • Condition: Demo
View full details